Home >> Winding machine >> Fully automatic toroid coil winding machine >> Rectangular core flat wire standing layout coil winding machine robot (SS-RF01)
Rectangular core flat wire standing layout coil winding machine robot (SS-RF01)
Product 2/5  Fully automatic toroid coil winding machine  Rectangular toroid core flat wire standing layout coil winding machine robot  (SS-RTF01)  Fully automatic slider type automatic toroid coil winding machine

Product name : Rectangular core flat wire standing layout coil winding machine robot (SS-RF01)

Deascription :

This fully automatic rectangular core flat wire standing layout coil winding machine robot (SS-RF01) ( without operator ) adopts precise servo motors and controlling systme with large LCD display. This winding robot output the finished wound coils in surprising speed without operator. This winding machine is used for winding the flat wire and layout flat wire on the rectangular core by standing. This fully automatic winding machine is best suited winding the rectangular core common mode inductor coils, inductance filter coils, transformer coils.

Features and specifications :

1. The flat wire thickness 0.1~0.4mm width 0.5~1.5mm ( Request the copper wire to be more softer, need two sets of wire feeding wheels and will increase the wear of the wire feeding wheels when the wire section larger. Please communicate with us when you design the coil diameter and wire thickness and width are close to the maximum ).

2. Rectangular outside core sizes range : 8*8 ~ 28*20mm, core height not limit.

3. Wire terminals stay position tolerance +/- 3mm.

4. Ending wire terminal length is determined by the winding tooling ( wire length 18-40mm ).

5. Starting wire terminal length requested by user set value according to the magnetic core size.

6. The alarm function of wire jammed make the wear of wire feeding wheels to be reduced to a minimum.

7. Magnetic core oversize alarm and removal function (When automatic mode)

8. Independent winding axis controlling.

9. Feed wires in fully automatic. Feed cores by vibration device in fully automatic.

10. The two wires feeding are independently controlled by two servo motors.

11. Capacity : Min. 1000UPH with wire terminals, Min. 1100UPH without wire terminals.

12. Voltage : Single phase AC220V power : 1.2KW, Air source pressure :0.4-0.5Mpa.

13. Machine sizes including cores loading vibration device ( L1500* W1300* H1900mm ).

14. Machine net weight: 360Kgs.


Product Search
Contact Us

  0086-592-6603065

 0086-592-3761682

   0086-189 6513 8473

 WhatsApp

 sanshineelectronics

 673469847

 sales@sanshinechina.com

 sanshineelectronics@gmail.com

 www.sanshinechina.com